KiloheatFans

SPECIALISTS IN

KiloheatFans

Air Movement

Roof Fans

ATEX Fans

· These air extractors are particularly suitable for aeration of big environments, warehouses, industrial sheds, thermal power plants, sanitary rooms and for all applications where it is necessary to have a change of air with low pressure

· They are installed on the roof of the building and they operate sucking the air from inside.  The temperature of the sucked air must not exceed 80^oC

· Construction: the electric fan unit consists of a three-phase electric motor, 220/380 V, 50 Hz, B5-V1, direct coupled to a high-efficiency centrifugal impeller which has been dynamically balanced according to grade 4.  The casing has the form of a cylinder with a square base with a lower flange for the fixing of the fan on a flat masonry base.  The motor is protected against the rain with a cap and it substained by a protection net.  All the non-rotating parts are made of hot-dip-galvanised steel.

· The noise level values in dB/A are the average results of the readings taken at a distance of 1.5m from the fan operating at maximum efficiency.  The frequency peak is observed around 1000 Hz.

 

TFR

TFR

· Kiloheat Range of ATEX Fans

· Please email us with your enquiry

Further Information

Volume from 0.19 to 5.30 m3/s

Total pressure from 140 to 1000 Pa

Operating temperature: from -20°C to +40°C