|
KiloheatFans |
|
SPECIALISTS IN |
|
KiloheatFans |
|
Air Movement |
|
Accessories for Ferrari Axial Flow Fans |
|
Available in three versions (see dimensional table), can be welded to the plant pipe or walled; countered with fan flanges, making installation easier |
|
Counter Flange |
|
Used to regulate the air volume of the fan maintaining its efficiency high |
|
Inlet Discharge Governor |
|
Reduces air volume according to the needs of the plant and it is suggested for starting with off outlet. Up to model SA 400x280 the flaps are parallel |
|
Air Reducing Flap |
|
Used to protect the fan from adverse weather conditions. Automatically opened by the air flow from the fan and closed by gravity when the air stops flowing |
|
Damper |
|
Reduces the air volume of the fan according to the needs of the plant |
|
Throttle Valve |
|
Put between the fan flange and the plant pipe to avoid transmission of noise and vibrations |
|
Flexible Connection |
|
Used to filter the air at the inlet of the fan. The filtration is made by a Viledon panel type P15/500/5 removable. |
|
Filter Inlet Side |
|
We mount a grid with mesh opening of 12 mm to protect eventual accidents |
|
Protection Net RC |
|
Put on inlet side to make the air inlet easier, improving performance and reducing noise. Generally installed on axials type EF and EB or on suction piping |
|
Mounted under support feet, they avoid the transmission of vibrations and noise to the frame. Made of special rubber. |
|
Vibration Dampers for Axial |
|
Inlet Nozzle |
|
Square Base |
|
Installed on axial fans or on pipes. Give support and stability to the fan, making it self-supported, instead of weighting on pipes. Also allow mounting of flexes and of antivibration rubbers. |
|
Supports PD (for EF) |
|
Installed on axial fans or on pipes. Give support and stability to the fan, making it self-supported, instead of weighting on pipes. Also allow mounting of flexes and of antivibration rubbers. |
|
Supports for ES |
|
Used for the installation of fans on frames or cases |
|
Installed on axial fans or on pipes. They give support and stability to the fan, making it self-supported, instead of weighting on pipes. They are used for vertical work. |
|
Supports PD/V |